Directions For Use :
It is a violation of Federal Law to use this product in a manner inconsistent with its labeling.
This product is not to be used as a terminal sterilant/high level disinfectant on any surface or instrument that (1) is introduced directly into the human body, either into or in contact with the blood stream or normally sterile areas of the body, or (2) contacts intact mucous membranes but which does not ordinarily penetrate the blood barrier or otherwise enter normally sterile areas of the body. This product may be used to pre-clean or decontaminate critical or semi-critical medical devices prior to sterilization or high level disinfection.
To Prepare Use Solution
Ratio / Per Gallon of Water / Per Liter of Water
1:16 8 oz. 64 mL
1:32 4 oz. 32 mL
1:64 2 oz. 16 mL
1:128 1 oz. 8 mL
1:256 0.5 oz. 4 mL
For Use as a One-Step Cleaner / Disinfectant: Dilute at 8.0 oz. of product per gallon of water (1:16).
1) Pre-clean heavily soiled areas.
2) Apply Use Solution by coarse trigger sprayer to hard, non-porous environmental surfaces. Spray 6-8 inches from surface; making sure to wet surfaces thoroughly.
3) All surfaces must remain wet for 5 minutes.
4) Wipe surfaces and let air dry.
For use as a disinfectant on precleaned non-critical medical devices¥ instruments and implements: Dilute at 8.0 oz. of product per gallon of water (1:16)
1) Instrument must be thoroughly cleaned to remove excess organic debris, rinsed and dried.
2) Thoroughly clean and rinse lumens of hollow instruments.
3) Using either tray or an ultrasonic unit, immerse instrument in use solution for 5 minutes at room temperature.
4) Remove and rinse instruments.
5) Wipe dry prior to use.
6) Discard solution after each use.
Non-critical medical devices are items that come in contact only with intact skin.
Note: Critical and Semi-critical devices must be followed up by appropriate terminal sterilization/high-level disinfection process.
For Use as a General Cleaner / Degreaser: Dilute product at 0.5 - 1.0 oz. of product per gallon of water (1:128 - 1:256). Apply to surfaces. Wipe surfaces and let air dry.
For Use as a Deodorizer: Dilute at 1 oz. of product per gallon of water (1:128). Apply to hard, non-porous surfaces. Let stand for 3 minutes.
Not recommended for use on copper, brass or marble.
Recommended Applications & Dilutions for Animal Housing Facilities